To determine which fuse shuts off the alarm, you typically need to consult the vehicle's owner manual or the fuse box diagram, as the fuse responsible for the alarm system can vary by make and model. Commonly, it may be labeled as "Alarm," "Security," or "Accessory." If you're unable to locate the specific fuse, consider disconnecting the car battery temporarily to reset the alarm system. Always ensure safety precautions are followed when working with electrical components.
Remove the fuse.
How do you turn off seatbelt alarm Nissan qashqai
remove the fuse from the fuse box
Try pulling the master fuse for the ignition to reset the alarm.
remove the alarm fuse
To re fresh the alarm, remove the fuse to the alarm, for 30 seconds then re fit, but be ready on the alarm key fob, to turn the alarm off, becose it will sound and flash the lights, when you first put the alarm fuse back in. After you turn off the alarm witht he key fob, it should work as normal alarm again :).
It should be fuse 25.
pull fuse out in fuse box
The alarm and the horn are interconnected in some models, if you pulled the fuse from the alarm it might have caused a surge big enough to blow the horns fuse, just replace it. You just have to make sure that the fuse you took from the alarm is back on. If the alarm is not working, disable it properly and not by removing a fuse.
When your alarm is going off, it automatically shuts off your fuel pump and other starting components, so that a thief cannot start the vehicle. It is an anti-theft mechanism.
maybe that or a bad alarm fuse
taking out he fuse disables the whole system..your alarm will no longer work