0
What else can I help you with?
Will 1996 5.0L Chevrolet push 36 inch tires good?
That depends on the gear ratio in the rear ends, not the engine. To make the truck have POWER with those big tires you need at least a 4.10 gear in the rear ends.
Can you put 20 inch tires on 15 inch rims?
Of course not. You need 20 inch wheel to mount 20 inch tires.
Do any European cars need 14 inch tires?
Many European cars use 14 inch tires.
How many tires are needed to replace all the tires on a car with 27-inch rims?
To replace all the tires on a car with 27-inch rims, you would need four tires.
What does the speedmater of a car show?
A calculation of the vehicle's speed based on the gear ratio the transmission is in, the rear end gear ratio, and the RPMs of the engine and input shaft. If you change your rear end gears (e.g., when putting in a lft kit and installing larger tires), you need to have the speedometer adjusted, as well.
How many tires are needed for a vehicle with 27x11 inch wheels?
To determine the number of tires needed for a vehicle with 27x11 inch wheels, you would need 4 tires.
How much lift do you need to put 33 inch tires on a 2013 Jeep Wrangler?
Putting a lift in a 2013 Jeep Wrangler and using 33 inch tires depends on what size tires you are using now. You can get 33 inch tires to fit any size rim. If the Jeep is already lifted you may not need anything else but tires. A 2003 Jeep Wrangler, Rubicon Edition, has a 2 inch suspension and uses 33 inch tires.
Will fifteen inch tires fit on a fifteen inch rim?
no you need a 16" rim
What gear ratio did a 2004 Chevy silverado 2500 hd 4x4?
All you need to do is call a Chevy dealer and give them the VIN# and asked them what the gear ratio is in your truck and they will tell you what the factory gear ratio is.
What size lift do you need for fit 35 inch tires on a wrangler?
4 inch lift
What do you do when you need to find out what your ring gear and gear ratio is?
There are four ways to find a ratio.1 A dealer can normally tell from the vin number.2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirementinfo.3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.There are four ways to find a ratio.1 A dealer can normally tell from the vin number.2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirementinfo.3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
Gear ratio for fixie. i got a 48t.16t gear ratio is that ok to do a wheelie. or do i need a smaller ratio?
48/16 is a decently high road ratio. Pulling a wheelie with that is going to be difficult.
