The battery cannot be removed quickly! Inductance of the wiring stores energy and keeps the current flowing and decaying smoothly. There will be an opposite polarity, higher voltage pulse on the battery terminals, limited by the circuit capacitance only.
If a 1.5 volt battery is replaced by a 9 volt battery in a circuit, the current flowing through the circuit will likely increase. This is because the higher voltage of the 9 volt battery will provide more electromotive force, pushing more current through the circuit, assuming the resistance remains the same.
The battery cannot be removed quickly! Inductance of the wiring stores energy and keeps the current flowing and decaying smoothly. There will be an opposite polarity, higher voltage pulse on the battery terminals, limited by the circuit capacitance only.
A electrical from a battery is the flow of elecrons through a circuit in the opposite dirrection to the current flow. This current flow also happens inside the battery between the plates.
current in series always stays the same
Current will go up by a factor of 6 times in that scenario.
Adding a seound battery to a series circuit will increase the voltage, and require less current to keep the lights (if there are any on) as bright. Say you have a 6v battery, then you add another 6v battery. the voltage of the circuit would be 12v
When a battery is hooked up to an open circuit, no current flows because the circuit is not complete. The voltage across the open circuit is equal to the battery voltage, but no electrical work is done since there is no flow of electrons. The energy stored in the battery remains as potential energy until a complete circuit is established.
V = IR, so if you double the voltage without changing the resistance, the current will also double.
The total current provided by the battery increases as more bulbs are added to a parallel circuit. This is because each branch in a parallel circuit receives the full voltage of the battery, leading to more current flowing through each branch as more loads (bulbs) are added.
In a series circuit, if one resistor is replaced with a resistor of lower resistance, the total resistance in the circuit decreases. This leads to an increase in the overall current flowing through the circuit.
When a battery is added to a parallel circuit, the total voltage in the circuit increases as the new battery adds its voltage to the existing voltage sources. The total current in the circuit may also increase as the additional voltage motivates the charges to flow through the parallel branches of the circuit.
When a battery's negative terminal is not connected to a circuit, it accumulates excess electrons, creating a negative charge. This creates a potential difference between the positive and negative terminals, which is the driving force for the flow of electric current when the battery is connected to a circuit.