They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
It combines two channels into one channel making the output for the speakers/sub woofers more powerful. But it is only good to bridge an amplifier if you know the amp is good quality because if its not, it will mess up the amplifier soon.
Nothing
When two or more capacitors are connected in parallel across a potential difference, the total capacitance increases. This is because the equivalent capacitance of capacitors in parallel is the sum of their individual capacitances.
The supply voltage in a parallel circuit remains the same regardless of the number of additional resistors connected. The voltage across each resistor in a parallel circuit is the same as the supply voltage. Adding more resistors in parallel will increase the total current drawn from the supply.
When you connect batteries in parallel, the positive terminals are connected together and the negative terminals are connected together. This increases the total capacity of the batteries, allowing them to provide more power for a longer period of time.
what happens if we remove Rc in RC coupled amplifier
Nothing happens. The stereo has a transformer that converts the power to DC, and 50 or 60 Hz input makes no difference.
The lamps will get dimmer. In a parallel circuit, voltage is constant. Whereas, in a series circuit, amps are constant.
If three lamps are connected in parallel and one blows out, the current in the other two does not change. This assumes that the net change in total current does not cause the power source to change voltage.
Sorry, but there is really no amplifier on the market with 8 ohms output impedance. The output impedance of a power amplifier is always less than 0.5 ohms. We use no impedance matching. We use voltage bridging. Scroll down to related links and look at "Interconnection of two audio units - Power amplifier and passive loudspeaker".
If the amplifier is not rated for 4 ohms impedence, you will quickly over-current the amp, burning out components. The power handling of the speaker and power output of the amplifier does not matter in this case. It must be compatible with the impedence load that you are connecting.