answersLogoWhite

0

Very Dangerous........it would be a dead short. andcouldcause a fire or explosion.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you hook 2 12 volt batteries together together to get 24 volts in a positive ground tractor?

Connect the positive terminal on one battery to the negative terminal on the other with heavy wire and battery clamps. Connect the remaining positive terminal to the metal chassis of the tractor, and run the remaining negative wire to the items to be powered, with any luck at all, through a fusebox.


What is the proper battery cable connection when jumping two automotive batteries?

When jumping two automotive batteries, connect the positive () cable to the positive terminal of the dead battery and the other end to the positive terminal of the live battery. Then, connect the negative (-) cable to the negative terminal of the live battery and the other end to a metal surface on the car with the dead battery, away from the battery.


How do you connect two deep cycle 12-volt batteries in parallel to an RV?

Assuming neither battery is used to start the engine, simply connect the positive (+) terminal of the first battery to the positive terminal of the second battery. Then connect the negative (-) terminal of the first battery to the negative terminal of the second battery. Connect the load circuit to the positive and negative terminals of one of the batteries as usual. You may want to charge the batteries separately before making the connection, since connecting a charged battery to a discharged battery will result in a very large current flowing from the charged battery to the discharged battery, possibly damaging the wiring or either battery.


How to recharge a motorcycle battery?

Connect the positive clip of the battery charger to the positive terminal on the battery. Connect the negative clip of the battery charger to the negative terminal on the battery. Select the charge rate you desire either 2,4, or 6 amp. The newer battery chargers will let you know when it is fully charged.


When removing the battery leads from the terminals you do what first?

Disconnect the negative - terminal first, then the positive + terminal. Unfasten the battery hold down clamp. When reinstalling the terminal connections connect the positive terminal first.


How do I hook tWO six volt batteries together to get 12volts?

Connect them in series. With the 2 batteries sitting side by side just connect the negative terminal (-) on battery # 1 to the positive terminal (+) of battery # 2. Now connect the red hot cable to the positive terminal of battery # 1. Then connect the negative black cable to battery #2. You will have 12 volts but the amperage of only 1 battery.


How can a capacitor be charged using a battery charger?

To charge a capacitor using a battery charger, you connect the positive terminal of the battery charger to the positive terminal of the capacitor, and the negative terminal of the battery charger to the negative terminal of the capacitor. The battery charger will then supply a voltage to the capacitor, causing it to store electrical energy.


Can you jump start a Ford Focus to focus?

sure connect the positive terminal directly to the booster battery and the negative battery terminal to the body


How do you wire 3 12 volt batteries in series?

To wire three 12-volt batteries in series, connect the positive terminal of the first battery to the negative terminal of the second battery. Then, connect the positive terminal of the second battery to the negative terminal of the third battery. Finally, the free positive terminal of the third battery and the free negative terminal of the first battery will serve as the output terminals, providing a total of 36 volts (12V + 12V + 12V). Make sure to double-check connections for safety and correct polarity.


How can you safely jump a car when the positive terminal is red?

To safely jump a car when the positive terminal is red, follow these steps: Connect the red (positive) jumper cable to the positive terminal of the dead battery. Connect the other end of the red jumper cable to the positive terminal of the working battery. Connect the black (negative) jumper cable to the negative terminal of the working battery. Connect the other end of the black jumper cable to an unpainted metal surface on the car with the dead battery. Start the working car and let it run for a few minutes. Try starting the car with the dead battery.


Charging a dead car battery?

To charge a dead car battery, you'll need a compatible battery charger or jumper cables and another vehicle with a working battery. If using a battery charger, connect the positive terminal of the charger to the dead battery’s positive terminal and the negative terminal to a grounded metal point on the car. If jump-starting, connect the positive terminals of both batteries first, followed by the negative terminal of the working battery to the dead battery's negative terminal. Allow the dead battery to charge for a sufficient time before attempting to start the vehicle.


How do you hook a car fan to the battery to see if it works?

If you have the fan removed from the car, you can just quickly use jumpers to connect the negative terminal of the fan to the negative terminal of the battery, then connect another jumper to the positive terminal of the fan,and with insulated hands(!) touch the other end to the positive terminal of the battery. If the fan runs, it's fine.