The minimum slope shall be 1% to 2%.
The slope of a mass versus volume graph for a fluid represents its density. Density is defined as mass per unit volume, so if you plot mass on the y-axis and volume on the x-axis, the slope of the resulting line indicates the fluid's density. Therefore, the correct answer is that the slope shows the density of a fluid.
ZERO pitch
during construction our basketball court(outdoor) it was felt that a minimum slope of 1:1000 may be provided transversely and a minimum slope of 1:500 may be provided longitudinally to drain off the rain water. and the slope may be adjusted according to the rainfall intensity at that area
The minimum slope required for roof drainage to ensure proper water flow is typically 1/4 inch per foot.
What fluid? Engine oil, transmission oil, power steering oil, coolant fluid, brake fluid.
In the North slope.
1" per 4' minimum.
The slope of the land can impact oil tanks by affecting their installation and stability. Installing oil tanks on a slope can lead to uneven weight distribution and potential leaks. It's important to place oil tanks on level ground to ensure proper functionality and prevent accidents.
24 and 719 is not enough information to define a slope. For 2-dimensional space two ordered pairs are the minimum required.
Irreducible oil saturation is the residual amount of oil that remains trapped in the pores of a rock or reservoir even after water flooding or displacement with another fluid. It represents the minimum amount of oil that cannot be produced by conventional methods and is typically left behind in the formation.
A pair of coordinates