0
What is needed to install a Bose CD cassette system in a 1997 non Bose Nissan Maxima?
Hello, if you want to install a Bose CD cassete in a 97 Nissan Maxima you will need to rewire the sound system in your car in order to have a wiring as required by Bose systems. Non Bose systems don't have the "finesse" that Bose systems have, that is, Bose systems requires shielded wires and cables to carry electrical signals to the amplifyers, that usually are disposed one per speaker in the 97 Maxima. Bose systems are very sensitive and have some relays and things like that to command the premium sound quality in the vehicle. It takes into account even the surface of the seats. The most important is: if you want to put a Bose system in your 97 Nissan Maxima, please find the speakers and the amps for the 97 Nissan Maxima, not from other Bose car system, as it will not work properly. Bose systems are specific design for a specific car. The first thing you can do is to go to phatg20.com and download the Nissan Maxima Factory Service Manual to see the wiring scheme, get the cables and speakers and amps and hands on work. Good luck.
What else can I help you with?
What type transmission fluid needed for 2006 Nissan Maxima?
What type of transmission fluid needed for 2006 nissan maxima
What PARTS ARE need to tune up 1995 maxima?
what parts needed to tuneup 1995 nissan maxima
How many pounds of freon is needed for 1994 Nissan maxima?
if its completely empty should take about 3 pounds
How many quarts of automatic transmission fluid does a 2000 Nissan Maxima hold?
4 to fill it ,unless its been rebuilt then 13 will be needed
Replace blower motor on 2002 Nissan Maxima?
I actually have a brand new blower motor for a 2002 Nissan maxima. Its brand new, I bought it from Sandy Sansing Nissan in Pensacola, Florida thinking I needed to replace it, but it was actually my fan control amplifier that needed replacing. So if you need a new blower motor, I can ship you a new one for a bargain. I paid 219.00 for it, I'll let it go for 100.00. Email me at ebonysailor@yahoo.com
How much should it cost to fix a blown head gasket on a 2006 Nissan Maxima?
The cost to fix a blown head gasket on a 2006 Nissan Maxima typically ranges from $1,500 to $2,500, depending on labor rates and additional repairs needed. This estimate includes parts and labor but can vary based on your location and the mechanic's expertise. It's essential to get a detailed quote from a trusted mechanic to understand the specific costs involved.
How do you remove the headlight assembly located on a 2005 Nissan Maxima?
To remove the headlight assembly on a 2005 Nissan Maxima, first, open the hood and disconnect the negative battery cable. Next, remove the screws and clips securing the headlight assembly, typically located at the top and side. Carefully pull the assembly out of its housing, and disconnect the electrical connectors. Finally, replace or service the assembly as needed before reassembling everything.
What are the steps to remove a Shimano cassette from a bike?
To remove a Shimano cassette from a bike, you will need a chain whip tool and a cassette lockring tool. First, remove the rear wheel from the bike. Use the chain whip tool to hold the cassette in place while using the cassette lockring tool to loosen and remove the lockring. Once the lockring is off, slide the cassette off the freehub body. Clean the freehub body before installing a new cassette if needed.
How can a 1997 Nissan Maxima axle get fixed?
1 - simplest and cheapest method- replace the axle 2- replace the CV joints and boots 3- lots of unnecessary work, very expensive - check the joints and replace as needed, replace boots
Can you put Lucas engine cleaner in a 2005 Nissan maxima?
The Lucas Upper Cylinder and Injector cleaner is versatile on all cars with fuel injectors. It is also referred to as "Tune-Up in a Bottle." Use every 2-3 months at most or more if needed.
How do you install wiper refills on a 2008 Nissan Altima?
My understanding is that to replace with refills - the dealer can do that. If you go aftermarket - you will replace the wiper arm - two different sizes needed, driver and passenger(28",17").
What is the best way to clean and maintain a bike wheel with cassette to ensure optimal performance and longevity?
To clean and maintain a bike wheel with a cassette for best performance and longevity, regularly wipe down the wheel and cassette with a clean cloth, use a degreaser to clean the cassette, and lubricate the chain and cassette regularly. Check for any signs of wear or damage and replace parts as needed. Store the bike in a dry place to prevent rust and corrosion.
