Check the Vehicle Emissions Control Information ( VECI ) decal
located in the front of the engine compartment ( it will show
the type of spark plugs to use and the spark plug gap )
motorcraft or aotolite
5.4
where are the spark plugs of a 2000 crown Victoria
Remove the coil on top of the plug. There's the spark plug.
If your 05' E250 has a Triton V8, you don't have spark plug wires. Each cylinder has it's own coil, which must be removed prior to retrieving spark plugs.
opposite end of the spark plug wire from the spark plugs
Check the Vehicle Emission Control Information ( VECI ) decal located in the front of the engine compartment ( it will show what type of spark plugs to use and the spark plug gap )
.042 to .046 inch (according to the 2000 Ford Ranger owners manual ) spark plug gap for the 3.0 L - V6 engine
To change the spark plugs on a Ford E250 van, first, ensure the engine is cool and disconnect the negative battery cable. Remove the spark plug wires by gently twisting and pulling them off the plugs, then use a spark plug socket and ratchet to unscrew the old plugs. Before installing the new spark plugs, check the gap with a gap gauge and adjust as necessary. Finally, insert the new plugs, tighten them to the manufacturer's specifications, reattach the spark plug wires, and reconnect the battery cable.
( .054 inch ) spark plug gap for the 4.0 L - OHV - V6 engine in a 2000 Ford Ranger ( according to motorcraft.com , one of Fords websites )
The spark plug wiring diagram for a 2000 F-150 can be found in its service manual. The service manual is available from Ford.
.042-.046 In.