A steam accumulator on some once through boilers, with no steam/water drum, is a device similar to a steam separator, which separates the steam and water before the steam is fed to the steam header.
A mechanical, or electrical accumulator???
Accumulator is what the British call a capacitor.
The size of the accumulator is the same,means 64bit.
As a rule, you'll need to purchase an appropriate re-seal kit for your accumulator. You will then need to disassemble your accumulator, clean everything and reassemble the accumulator with the new seals that came in your kit.
The accumulator stores brake fluid under very high pressure. An electric pump keeps the accumulator pressurized with brake fluid. When you press the brake pedal, pressurized fluid from the accumulator operates the brakes.
An accumulator machine, also called a single accumulator organisation , or a CPU with accumulator-based architecture, is a kind of CPU where, although it may have several registers, the CPU mostly stores the results of calculations in one special register, typically called "the accumulator". Historically almost all early computers were accumulator machines; and many microcontrollers still popular as of 2010
There is no set millage for when you should replace a manifold line and accumulator. Most mechanics only replace when the accumulator and/or manifold lineÊstart to fail.
Accumulator contains one of the operand for any operation which is performed by the ALU.The result of the operation is stored in the Accumulator. thus it is a special register
Normally the return value from the function is through the information from the accumulator.
There isn't a rear accumulator. There is a rear orfice tube and evaporator.
To clear an Accumulator in programming, you can use the following methods: Reset to Zero: Simply assign the Accumulator variable to zero (e.g., accumulator = 0;), which effectively clears its value. Re-initialize: If the Accumulator is part of a data structure or object, re-initialize the entire structure or object to its default state, which will also clear the Accumulator. Use a Clear Method: If the programming language or framework provides a specific method to clear or reset the Accumulator, call that method (e.g., accumulator.clear()), which is often designed to handle additional cleanup tasks.
To clear only Accumulator & not the Flag Register, you can use: 1) ANI 00 H 2) MVI A, 00 H To clear both Accumulator as well as Flag Register, use: LXI H, 0000 H PUSH H POP A.