its the traction control light. more specifically its the traction control malfunction light
how do i fix the problem if the tcl light comes on in a 2003 mitsubishi galant
Traction control.
Tcl was created in 1988.
there are two TCL lights. The blue-green one says the TCL system is active (you are in a slide or cornering too fast) Vacuum is released to get the engine to about 3000 rpm (torque limiting) and selective braking is applied. Why you would want to see the light in this condition is questionable. The other orange light is the indication that you have turned TCL off or you have a problem with the TCL system. many codes so you need to have someone with a tcl capable scanner read the system then go for the fix. Rarely the computer. most likely the valves above the master cylender on the firewall. Code 71 means the left valve (vacuum valve) is bad and 72 means the right valve (aspirator valve) is bad.
tcl
who makes the tcl tv's
The population of TCL Corporation is 50,000.
TCL Corporation was created in 1981.
To turn on the TCL (Traction Control Light) in a 2007 Mitsubishi Endeavor, locate the traction control switch, which is usually found on the dashboard or near the gear shifter. Press the switch to activate the traction control system; when engaged, the TCL light on the dashboard should illuminate. If the light does not turn on or remains on while driving, it may indicate a malfunction in the system that requires further inspection. Always refer to the vehicle’s manual for specific instructions and troubleshooting.
Its the light that signifies the traction control system has malfunctioned. Wheel bearings are a possibility for it to turn on I believe.
you can get the diagram of tcl 2111 at omni logistcs corp.
The chassis number for the TCL model TCL-14N23N is typically found on the back or bottom of the television or on the packaging. However, specific chassis numbers may vary, so it's best to consult the user manual or contact TCL customer support for accurate information related to that model.