answersLogoWhite

0

The best spark plug for a kW generator typically depends on the generator's engine specifications and manufacturer recommendations. Common options include NGK and Champion spark plugs, which are known for reliability and performance. It's essential to check the generator's user manual for the correct type, heat range, and gap specifications to ensure optimal performance and longevity. Using the recommended spark plug will help maintain efficiency and reduce the risk of engine issues.

User Avatar

AnswerBot

3w ago

What else can I help you with?

Related Questions

What is Ignition point 20.9 kw?

It is the heat flux generated due to ignition of fuel at the spark plug


How many kw generator is good for 1.5 ton air condition?

5.274 KW


How many gallons does a generator use per hour?

Depends upon the Kw rating of the generator. The higher the Kw rating the more fuel will be used.


How much power does a 5.5 kw generator produce?

A 5.5 kW generator produces 5,500 watts of power. This is the maximum power output that the generator is capable of producing under optimal conditions.


Can a 400 kw generator handle a 460 kw load?

Since the breaker that is installed on the generator set will be sized to the output of the 30 kW generator, the load will stay connected until the thermal trip of the breaker trips the load off line. This will be in the matter of seconds before it happens. To handle a 75 kW load and depending if it is an inductive or a resistive load you will need at least a 80 to 100 kW generator.


How many alternator generator turbines will it take to run a full household?

It depends on the total connected load (KW) of the house. If the total connected load is about 20 KW the alternator generator should be designed to meet peak 20 kw load


What size generator do you need to move a 30 hp electric motor?

A 5 kW generator would turn it over but if the full 30 hp of mechanical power is needed, that would require about 30 kW of electric power from the generator.


What size of generator do you need to power 30 kW Air compressor?

To power a 30 kW air compressor, you would typically need a generator with a capacity of at least 37.5 kW to account for starting surges and ensure reliable operation. It's advisable to choose a generator with a higher output, such as 40-50 kW, to provide a safety margin and handle any additional loads. Make sure the generator is compatible with the air compressor's voltage requirements as well.


What is the nominal voltage of a 150 kW 480 v generator?

480V.


Emergency generator 135 kw using in crew ship?

off


What size gas engine to run 35 kw generator?

At 746 watts per horsepower (electric) a 35 kw generator would require about 470 horsepower. Round that up, and allowing for control loop margin and mechanical losses, I would guess that a 35 kw generator should need a 500 or 600 horsepower engine.


What sizes are Onan generators available in?

Onan diesel generator sets are available in sizes ranging from 10kW to 2.5 MW. Spark-ignited gas generators range from 5 to 150 kW in size. Lean-burn gas generators are available in 315 kW to 2 MW sizes.