The Ryobi 725R trimmer typically requires a fuel-to-oil ratio of 50:1. This means you should mix 2.6 ounces of 2-cycle engine oil with 1 gallon of unleaded gasoline. Always ensure to use a high-quality, low-ash 2-cycle oil for optimal performance and engine longevity.
I have a Ryobi BC30 Brush Cutter and the manual calls for a 2 cycle engine oil for air cooled engine TCW @ 50 to 1 ratio or 2.6 oz per gallon. States do not use TCW3 for water cooled engine or automotive type oil. Hope this helps. O fern
If the Ryobi is a 2 stroke engine you must use 2 stroke oil and never use 4 stroke. But you ask about 20w50 oil which is confusing. 2 cycle engine do not use multi-vicosity oil. Any 2 cycle oil can be used in your Ryobi if it is mixed at the correct ratio.
2.6 oz. of 2-cycle engine oil per gallon of gas.
if 4-cycle-Use Valvoline 10W-30 oil if 2-cycle-use ryobi or any other brand of 2-cycle oil
The Gas/Oil ratio is 50:1
20w/50 is what comes with the 4-cycle string trimmer. While Home Depot is the sole distributor of Ryobi tools, they do not have the oil in Montgomery, AL
Yes it is.
2.6 ounces of oil per gallon of gas. A 50 to 1 ratio.
2.6 ounces of oil to one gallon of unleaded gasoline.
Sae30 sf, sg, sh
20w/50 is what comes with the 4-cycle string trimmer. While Home Depot is the sole distributor of Ryobi tools, they do not have the oil in Montgomery, AL