Well with out exactly checking the manual the b2200 holds right at one gallon of antifreeze/water.Just to give you a example I use almost a full gallon of antifreeze and top of with water and put the remaining antifreeze in the overflow container between the low and full level when I do a cooling system flush and refill.I have owned my 1987 for 23 years since new and this is normally what I do!If you do a flush drain the old fluid out,refill with water add flush (prestone brand or other is fine) run to normal temp,drain refill with clean water and run for 20 minutes and drain and then add new coolant and water(recommend distilled water) cuts down on corrosives in normal tap water and this is a real short version of the process.Hope this answers your question.
The 1993 Ford Taurus coolant system has a fluid capacity of six gallons. The manufacturer recommends a 50-50 mix of water and anti-freeze.
11 Quarts
I dunnaknow
10.5 qts
9 qts
5.0 Litres (5.3 US Quarts)
1993 Mazda mx6 gas tank capacity is 58 litres, its same for 1993-1997 models. thanx jay
The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com
All 1986-1993 trucks share the same body style.
on the front of the intake on left side when standing in front of truck.
3 gallons or till it is full.
All the 1986-1993 mazda b series trucks were manufactured in japan.By the way great built trucks for that matter.