The correct idle speed is 1RPM x4.2-7.888
850 RPM,
Idle speed is automaticaly controlled by the computer. If idle speed is not correct, the car has a vacuum leak or a sensor problem.
Apporximately 1200 RPMS
It is not adjustable. If the idle speed is not correct, then you have a sensor/actuator/computer issue.
You don't. The ECM (Engine Control Module) maintains the correct idle speed. If the idle is out of control you probably have a vacuum leak.
The computer will control the idle speed anywhere from 550 to 1200 rpm's
From commands sent to it from the ECM, the ISC valve opens and closes allowing air into the system to maintain correct idle speed.
The proper idle speed for a Dodge with a 318 cubic inch engine about 475 to 500 RPMs. Any idle below that will cause stalling.
To set the idle speed on a Nissan Sunny, first ensure the engine is at normal operating temperature. Locate the idle speed adjustment screw on the throttle body; this may vary by model. Use a tachometer to measure the engine's RPM while adjusting the screw to the recommended idle speed specified in the vehicle's service manual. After adjustments, verify that the idle remains stable and within the correct range.
Hey Jonathan==It varries between cars. If your car is later than about 1986 it is computer controled and you cannot change it. Sometimes if the idle speed solonoid is bad or dirty, the idle will be wrong. Goodluck, Joe A vacuum leak will also cause idle quality issues.
The correct idle speed for a Yamaha V-Star 1100 is typically around 1,100 RPM. It's important to consult the owner's manual for specific adjustments and recommendations, as variations can occur based on individual bike conditions and modifications. Always ensure the engine is warmed up before making any adjustments to achieve the most accurate idle speed.