answersLogoWhite

0

Generally, there are two levels on a dipstick. With the car level and the engine hot, the fluid should be up to the "hot" mark. With the car level and cold, it should be to the cold mark.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

HOW TO CHECK POWER STEERING FLUID FOR 2005 CARAVAN?

To check the power steering fluid in a 2005 Dodge Caravan, first locate the power steering fluid reservoir, which is typically found near the front of the engine compartment. Make sure the engine is off and cool, then remove the cap and wipe the dipstick attached to it. Reinsert the dipstick without screwing it in, then remove it again to check the fluid level against the markings on the dipstick. If the fluid is low, add the appropriate type of power steering fluid until it reaches the correct level.


How do you know if its enough transmission fluid?

When the fluid level is correct, either by a dipstick or a check plug.


Where do you check the power steering fluid on a 1989 240sx?

There is a power steering reservoir under the hood of the car. Remove its cap, and the dipstick is attached, this is where a person can check the fluid level.


Where is the power steering reservoir on a 1992 Chrysler LeBaron?

Its at the back and below the engine.. to fill it pull the dipstick marked POWER STEERING which is at the back of the engine to the left of the airfilter box.. and add fluid to the level marks on the dipstick


How come there is no transmission dipstick in 2007 jeep liberty?

The fluid level is very temperature specific. With out a scan tool it is impossible to determine the correct level so Chrysler made the dipstick a special tool for the dealer.The fluid level is very temperature specific. With out a scan tool it is impossible to determine the correct level so Chrysler made the dipstick a special tool for the dealer.


Where do you put transmission fluid in a 1994 Nissan Quest?

Remove the dipstick for the transmission. Place funnel in the dipstick hole. Fill to the correct level.


How can i check the power steering oil on an Audi a3?

To check the power steering fluid on an Audi A3, first, locate the power steering reservoir, which is typically near the front of the engine bay. Remove the cap and wipe the dipstick attached to the cap clean, then reinsert it and remove it again to check the fluid level. The fluid should be between the minimum and maximum markings on the dipstick. If the level is low, add the appropriate power steering fluid as specified in your owner's manual.


What is the proper level of power steering fluid in Toyota Avalon?

the filler lid has a dipstick with marks on it The reservoir tank also has indications on it.


How do you check power steering fluid on 03 5.7 hemi dodge truck?

Under the hood there is a cap, that is usually yellow, labeled with Power Steering. This is where a person can remove the lid and check the dipstick to check the level of power steering fluid on this truck.


Where is the dipstick to check transmission fluid for a 2001 Saturn L 300?

There is no dipstick. Level is checked via a specific bolt hole after engine is warm and running and the car is 'level'. If the transmission fluid is slightly dripping out of this bolt hole, or is even with the threads, then the level is correct.


Where is the steering fluid on a Suzuki wagon r?

In a Suzuki Wagon R, the power steering fluid reservoir is typically located near the engine, often on the driver's side. It usually has a cap labeled with a steering wheel icon or the words "power steering." To check the fluid level, remove the cap and inspect the dipstick or the fluid level indicator on the side of the reservoir. Always ensure the engine is off and cool before checking the fluid.


What is the correct transmission fluid level in a 2006 dodge sprinter van?

The correct fluid level is determined with the use of the dealers scan tool and the dipstick ( which is a special tool ). The scan tool is required to know internal trans temperature, That is compared to a chart and the correct fluid height can then be measured.