Set of 8 (eight) hydraulic lifters, $155, labor 6 hours@$75/hr= $ 605. There will probably more costs, intake manifold gasket, valve cover gasket, and most shops and dealers add a surcharge for hazardous material disposal i.e. lost fluids during job, and cost of fluid(s) needed to replace what was lost. Best estimate is $700 shop, $1200 Dealer
The 4.3L would have 12 hydraulic lifters.
Possibly the lifters?!?
Dealership price is around 1600 dollars
replacing serpentine belt on 2000 chevy prizm need help
To bleed hydraulic lifters on a 2000 Daewoo Nubira, start by removing the valve cover and ensuring the engine is off. Manually compress each lifter using a suitable tool to expel any trapped oil. Refill the lifters with oil by submerging them in clean engine oil and compressing them repeatedly until no air bubbles are released. Once bled, reinstall the lifters and the valve cover, and run the engine to ensure proper function.
do i need to change the manifold when replacing thermostat
Only in the corners.
I remove the fuel pump fuse or relay while the engine is running. The engine will run until the pressure has dropped. Leave the fuse or relay out until you have finished replacing the fuel filter.
about $2000
About $210 not including shipping & handling.
Yes
NO. They are not even close to being the same. Chevy redesigned everything in 2000.