Diesel fuel has a relatively low flame spread compared to more volatile fuels like gasoline. Its flash point is typically above 60°C (140°F), meaning it requires a higher temperature to ignite. When ignited, diesel burns steadily, but it doesn’t spread flames as rapidly due to its higher viscosity and lower volatility. This characteristic makes diesel fuel less hazardous in terms of flame spread in comparison to many other fuels.
Yes but only in the right conditions. If diesel is outside just on the road, for example, then no it will not ignite from a flame.
yes. Diesel is a very stable fuel . it wont even react much when put to a flame!
to coat burner parts with diesel fuel and evacuate fuel from the fuel pump
The heat from a fire in the vertical spread is traveling upward and preheating the fuel about to be burned; whereas in horizontal spread, most of the convective heat is escaping into the atmosphere. Only the radiant heat is warming the material to the side.
Paul V. Ferkul has written: 'A model of concurrent flow flame spread over a thin solid fuel' -- subject(s): Flame spread
It is said that diesel fuel can be used to repel snakes in a yard. Another good method that can be used for repelling snakes is to spread mothballs along the perimeter of the yard.
by the wick the fuel gets to the flame
Glass does not burn or contribute to flame spread, so it typically does not have a flame spread rating.
No, fuel flash point and cetane rating are not the same. Flash point is the temperature at which fuel can ignite momentarily when exposed to a flame, while cetane rating is a measure of the ignition quality of diesel fuel, indicating how readily it ignites under compression in a diesel engine.
Diesel engines run on diesel fuel. Gasoline will destroy a diesel engine.
The flame spread rating of carpet is typically measured on a scale of 0 to 200, with lower numbers indicating a slower rate of flame spread. Carpet with a lower flame spread rating is considered safer in the event of a fire.
Flame spread 10 is a rating associated with the surface burning characteristics of a material. It means that the material has a low flame spread index and is considered to have good fire-resistant properties. Materials with a flame spread 10 rating are slow to ignite and will not contribute significantly to the spread of fire.