The fork oil capacity for a 2007 Yamaha YZF-R6 is approximately 420 ml (14.2 oz) per fork leg. It's important to use the recommended fork oil type, which is typically 10W, but always refer to the owner's manual for specific details and maintenance guidelines. Additionally, ensure the forks are fully compressed and the oil is at the correct level after filling.
The fork oil capacity for a 2006 Yamaha R6 is approximately 550 ml (or 18.6 ounces) per fork leg. It's important to ensure that you use the correct type and weight of fork oil as specified in the owner's manual to maintain optimal performance. Always check the manual for specific details regarding oil level and maintenance procedures.
The fork oil capacity for each cartridge of a 2006 Yamaha R6 is approximately 470 milliliters (ml). It is essential to use the recommended type and viscosity of fork oil, typically 10W, to ensure optimal performance. Always consult the owner's manual or service guide for specific details and recommendations.
476ml
The fork oil capacity for a 2000 Honda CBR600F4, often referred to as the R6 in some contexts, is approximately 500 milliliters (or about 16.9 ounces) per fork leg. However, it's essential to refer to the service manual for the specific model and year, as capacities may vary slightly based on modifications or specific fork types. Always ensure to check for the correct oil type and viscosity recommended for optimal performance.
210mm
two and a half i am pretty sure .. i would put 2.5 bottles then start it up and ckeck the level then put another .3 if needed
Yamalube motor oil
2.85 quarts
im 17 and i have an 07 r6 and so far i had it to about 175 but that wasn't quite at red line. i have heard from others with the same bike that they have gotten to 186.
http://www.motomummy.com/store/pages.php?pageid=18
About 2.75q with a new filter, and about 2.5q if you are just changing the oil
Its called by most a shorty...I bought one for my 07 R6 from yamaha. It is made by GYTR...