338 millilters or drain the oil completely (empty the tubes by removing the caps and turning them upside down) remove the springs, compress the forks until bottomed and fill with fork oil (15W per Yamaha recommendation) until 100mm (4 inches) from the top of the tube. DON'T fill them to the top.
The fork oil capacity for the 1978 Yamaha DT 250 is approximately 10.5 ounces (or about 310 milliliters) per fork leg. It's important to use the recommended type of fork oil, typically a 10W to 15W grade, depending on your specific riding conditions and preferences. Always refer to the owner's manual for precise specifications and maintenance guidelines.
400ml
110mm standard
The fork oil capacity for a 1978 Honda CB750F is approximately 10.6 ounces (or about 315 milliliters) per fork leg. It's important to use the correct type and viscosity of fork oil as specified in the owner's manual for optimal performance. Always ensure to check the oil level after filling to maintain proper fork function.
243cc of 10w per leg
533ml of 10 wt
155-160 mL
7.3 to 7.5 fl. oz.
ex250 ninja 2008 10w fork oil, 360 ml and 108 mm air gap
The fork oil capacity for a 1978 Honda CB750 is approximately 10.6 ounces (or 315 milliliters) per fork tube. It's important to check the specific model and any modifications, as capacities can vary slightly. Always use the recommended type and viscosity of fork oil for optimal performance.
About 16 US fl oz.
r1 fork oil capacity