The recommended fork oil level for a 1997 KTM 360 EXC is typically around 100mm from the top of the fork tube when fully compressed and with the springs removed. However, it's essential to check your owner's manual for specific details, as levels may vary based on individual setup preferences and riding conditions. Always ensure to use the appropriate fork oil type and viscosity for optimal performance.
650cc of 10w30
No, 93-97 ktm 250-360 exc will fit it, not much else. found out the hard way on my 96 ktm 360exc
10w30 will be just fine.
The 2004 KTM 250 EXC typically requires about 400 ml of fork oil per leg for its front forks, but this can vary slightly depending on individual setup preferences. Always consult the owner's manual or service manual for the specific model for the most accurate information. Additionally, ensure you use the recommended type and viscosity of fork oil for optimal performance.
The 2009 KTM 300 EXC typically requires approximately 450 ml (15.2 oz) of fork oil per fork leg. It’s important to use the correct type and viscosity of oil, usually around 5W or 10W, depending on your riding conditions and personal preference. Always check the owner's manual for specific recommendations and perform maintenance according to your needs.
i have just bought myself a 1996 ktm 360 exc, i have already been up to 155km/h on it with supermoto tyres and it still had more go in it.
A short, water getting in the light socket. exc.
Check for any lose connections, wires, exc.
exc satands for excelent x caty
Yes they just made it street legal because everyone was just converting them illegally anyways.
For the KTM 360 EXC using Motorex Cross Power 2T fully synthetic oil, the recommended fuel-to-oil ratio is typically 50:1. This means you should mix 2.5% oil with your fuel. However, always refer to your owner's manual for specific recommendations, as different conditions or riding styles may require slight adjustments.
Yes, you can add fork oil to your KTM 250 EXC while the forks are still on the bike, but it's essential to do so carefully. You should measure the oil level accurately, and it's best to use a syringe or a similar tool to avoid spills. However, for a thorough maintenance check or if the oil is significantly low, it might be more effective to remove the forks for a complete service. Always refer to your owner's manual for specific instructions and oil specifications.