Heater Core
The blower motor on a 96 Accord is behind the glovebox. You need to remove the door to the glovebox and the glovebox frame from the dashboard to get to the motor.
Intake manifold gasket
Your coolant pump is behined the fan, you will have to replace the water pump.
Maybe there's coolant leaking from somewhere. (I don't know!)
If coolant is leaking behind the crank pulley on a Nissan 240SX, it may indicate a failing water pump or a blown head gasket. The water pump is responsible for circulating coolant, and if it is leaking, it could be due to a worn seal or bearing. Additionally, a blown head gasket can cause coolant to leak into the engine's oil system or external areas. It's essential to inspect these components and address the issue promptly to avoid further engine damage.
It's behind the glovebox. open the glovebox and remove the retaining clips that prevent it from opening all the way. You can then see the filter housing behind the glovebox.
behind the glovebox
On a 1996 Accord, the blower motor is located in the dash behind the glovebox. The door to the glovebox must be removed and the frame needs to be taken out of the dash to get to the blower motor.
behind the glovebox. glovebox needs to be removed
Behind glovebox in heater housing...remove glovebox and picture will form....
Behind the glovebox .
Behind the glovebox.