25.3 mm 0.996 in
The minimum thickness for the rear rotors on a 2006 Dodge Grand Caravan is 0.44 inches. When they have worn beyond this point, they must be replaced for proper braking power.
The minimum thickness for rotors on a Dodge truck is between 0.5 and 1 inch. It varies greatly based on the model and whether it is the front or rear brakes.
Untill it reaches the minimum thickness indicated on the rotor. It depends on how much is taken off each time
The thickness of the brake rotors on a 2014 Dodge Grand Caravan typically measures around 1.10 inches (28 mm) for the front rotors and about 0.43 inches (11 mm) for the rear rotors when new. It's important to check the manufacturer's specifications for exact measurements and to ensure that the rotors are not worn beyond the minimum thickness, which can lead to decreased braking performance and safety issues. Regular inspection and maintenance are recommended to ensure optimal braking performance.
.374
If they have enough thickness left to still be above legal minimum thickness after the resurfacing, yes.
Drums not rotors on a 2002 Dak, probably the same on the 2003
The minimum thickness for a 1999 Dodge Durango rotor is .890, measured in In thousandths of an inch. Any rotor thinner than this should be removed from the vehicle and recycled.
Minimum thickness is .8898 in.
Yes, if you measure the rotor thickness, they will be under minimum spec.
A dodge caravan may be experiencing rear brake noise due to needing new brake pads. This may also be due to worn rotors.
Aggressive driving.