Anode
The terminals on a battery are called electrodes. There are typically two types: the positive terminal, known as the cathode, and the negative terminal, known as the anode. These terminals facilitate the flow of electric current by allowing electrons to move between them during the discharge and charging processes.
it is called the positive pole,if you want to go deeper when using (discharging) a battery it is called a cathodewhen charging the battery it is called an anodeThe positive terminal.
it is called the positive pole,if you want to go deeper when using (discharging) a battery it is called a cathodewhen charging the battery it is called an anodeThe positive terminal.
Positive and Negative Terminals.
If you connect the terminals together with them unhooked from the battery and the engine off, yes that is also called a capacitive discharge.If you connect the terminals together with them unhooked from the battery and the engine off, yes that is also called a capacitive discharge.
You must get a couple of so-called jumper cables. The cables have strong clamps on them and are designed to be clamped to the battery terminals. Attach the black cable to the negative terminals of the motorcycle and car battery first. Then attach the red or positive cable to the positive terminals of the motorcycle and the car battery. In case your motorcycle battery is empty, you can now start the bike from the car battery. Disconnect the cables in reverse order, beginning with the red cable. The motorcycle battery will not be charged much by the car battery but the bike can be jump started by using this method.
A battery contains a charge of electrons. When these electrons leave the battery and travel through a circuit that is described as current.
first you have to have a new mom and eat a monkey
The liquid contained in batteries that conducts electric charge is called the electrolyte. It allows for the flow of ions between the battery's positive and negative terminals, enabling the battery to generate electricity.
The two places on a battery to which a circuit wire is attached are called terminals. One terminal is the positive terminal, often marked with a plus sign (+), while the other is the negative terminal, marked with a minus sign (−). These terminals allow for the flow of electric current when a circuit is completed.
The parts of the battery that stick out are called the terminals. That is where you attach the wires to the battery so you can use the electricity from the battery.
In a car battery, the acid solution is called electrolyte. It is typically a mixture of sulfuric acid and water that helps facilitate the flow of electrical current between the battery's positive and negative terminals.