40:1 with high quality 2-stroke oil mix would be fine.
http://store.chainsawr.com/
50:1 is incorrect. That mixture will not allow enough compression and the unit will be very hard to start, if at all. That mixture works well for Sthil products. If using an oil other than McCulloch, the ratio is 40:1. Brand specific McCulloch two cycle oil is 20:1.
25 to 1 is the mixture for the fuel
I use 4oz. per gallon of gas.
.025:1, gas to oil
i would have to know what kind but it is gennerally 32:1
Looks to be 40:1 gas to oil
8 oz of oil per gallon of gas
The proper mixture is 40:1 or 3.2 oz oil to 1 US Gallon of gas.
Your chainsaw may not be idling properly due to issues with the carburetor, air filter, spark plug, or fuel mixture. It is recommended to check and clean these components to ensure proper idling. If the issue persists, it may require professional servicing.
50:1
Chainsaw chains are not universal and vary depending on the brand and model of the chainsaw. It is important to use the correct chain for your specific chainsaw to ensure proper functioning and safety.
An Eager Beaver chainsaw typically requires a mixture of high-quality two-stroke engine oil and gasoline, often in a 50:1 ratio. It's important to use oil specifically designed for two-stroke engines to ensure proper lubrication and performance. Always refer to the user manual for specific recommendations regarding oil type and mixing ratios.