answersLogoWhite

0

Remove the plug wire from one plug. Do this carefully by twisting the boot on the plug and then pulling it off. Only pull the boot and not the wire. Before removing the plug use compressed air to blow out the area around the plug. Remove the plug and and replace with the exact same OEM plug which has been gapped to the factory specs. This is listed in the owners manual and under the hood on a placard. Before inserting the plug, coat the threads with anti-seize compound. Tighten the plug to the proper torque. Over or under tightening is a no no. Call the dealer for the torque specs. Replace the plug wire until you feel it pop or know that it is connected fully. Move to the next plug and repeat. Only do one at a time in order to prevent getting the wires mixed up.

User Avatar

Wiki User

20y ago

What else can I help you with?

Related Questions

What Size of spark plug gap in 2008 Mazda 3 2.0 liter?

For the stock XP Iridium spark plugs the gapping is .051, I would suggest not changing the stock spark plugs until your warranty has expired. Mazda tried giving me crap for changing mine.


What is the spark plug gap for a 1985 Mazda rx7?

the proper plugs come pre-gapped. you do not need to adjust them.


How do you change glow plugs Mazda 5?

The Mazda 5 does not have glow plugs. Maybe you meant spark plugs?


Can you start a Mazda rx8 without changing the spark plugs?

Yes, you can start a Mazda RX-8 without changing the spark plugs, provided the existing plugs are in good condition and functioning properly. However, if the spark plugs are worn or fouled, they may cause starting difficulties or poor engine performance. Regular maintenance, including checking and replacing spark plugs as needed, is recommended to ensure optimal engine operation. If issues persist, further diagnostics may be necessary.


How many spark plugs on a Mazda 6 s?

A Mazda 6 s requires 6 plugs, A Mazda 6 i requires 4


How many sparks plugs Mazda tribute 2004 3.0?

The Mazda Tribute has 4 plugs (4-cylinder) The 3.0L V-6 has six plugs.


What are the best spark plugs to use in a 1999 Mazda 626?

For a 1999 Mazda 626, the best spark plugs are typically NGK Iridium IX or Denso Platinum plugs, as they offer excellent performance and longevity. The recommended gap for these plugs is usually around 0.044 inches. Always check your owner's manual for specific recommendations and ensure proper installation for optimal engine performance.


What are the spark plug gap specifications for a 1998 Mazda B2500?

It is important to remember the spark plug gap when changing the spark plugs of a vehicle. A 1998 Mazda B2500 has a spark plug gap of 0.042 to 0.046 inches.


What is the proper wiring order for the spark plugs on a 1993 Mazda mx6 4-cylinder?

the passenger side is 1 then they go in order to the drivers side


What type of Spark plugs for a 1997 Mazda Protege?

I have had the best luck using NGK. Obtain proper plug number and gap from owners manual.


Which spark plugs are the leading on a Mazda rx8?

The bottom plugs - marked "L" for leading.


How many spark plugs are in a 94 Mazda mx-6?

there is six spark plugs