To absorb the shock of the rebound after a trucks tires hit an obstacle. ie pothole. Secondly it prevents fanning of the leafs.
the eye of a leaf spring, assuming u mean the eye at end of spring, is used to bolt the spring to the vehicle
Suspension.
Spring steel.
To keep the leaf spring in place and it doesnt fall a part
The surgeon places a plastic clip across a tube held in place by a steel spring.
steel and more steel
A carabiner clip is a metal loop with a spring loaded gate. The purpose of a carabiner clip is to remove slack from a rope or cord. It is often used in climbing.
Nissan is another word for spring .There is lots of leaves in the spring. Lots of Falling leaves.
this questions easy.. can you bouncy?--no so it's not a verb c;
The bushings are pressed into the eye of the leaf spring on each end. The leaf spring should be removed and the old bushing pressed out on a shop press then press a new bushing pressed back in. In the old days I used to burn the old rubber out of the bushing then chisel out what is left.
A rebound hammer is a non destructive hammer used to test various things such as concrete.
Spring scales can be classified based on their capacity (maximum weight they can measure), divisions (increments of weight they can measure), and the type of spring mechanism used (e.g. spiral or leaf spring). Additionally, they can be classified as analog or digital based on the type of display they have.