The fuel lines on the Poulan 2375 chainsaw typically consist of two lines: one for drawing fuel from the tank to the carburetor and another for returning excess fuel back to the tank. The longer line, often with a filter at the end, goes into the fuel tank and connects to the carburetor inlet. The shorter line usually connects to the carburetor's return port. It's essential to ensure that these lines are correctly routed to prevent fuel leaks and ensure proper engine performance.
Use the idle speed adjustment screw to set the idle speed as low as possible without stalling. http://store.chainsawr.com/
It is not real clear, but the parts breakdown is linked below. To tell the logic of it, the line with the filter attached will go into the pump side of the carb (often the bottom) and the discharge will exit the mteering side. The pump side will have "flappers" and the metering side will have a metal disc.
The small line from the tank (with the fuel filter) goes to the top port of the carburetor. The large line from the fuel tank goes to the center port of the primer bulb. The other port of the primer bulb goes to the bottom port of the carburetor.
2375/100 = 23.75
23.75 %
2200 + 170 + 5 + 6/10 + 8/100 = 2375 + 6/10 + 8/100 = 2375 + 60/100 + 8/100 = 2375 + 68/100 = 2375 and 17/25
2375 as a fraction = 2375/1
228,676,875
2375
It is: 0.025*95000 = 2375
23.75 = 2375/100 = 95/4
2375