.030
Plug is Champion RJ18Y. Gap is 0.035 This is on page 12, in maintenance section of Toro S200 Snowthrower operators manual. Checked at local Advance Auto Parts store here in upstate NY (south of Rochester) and they cross referenced this plug and said to use Autolite # 86, Price $1.69 + tx
The spark plug may be fouled. Remove the plug and check to see if it needs to be replaced.
Champion 5843
My S200 has a Champion RJ18YC plug installed or a Number 58. Gap should be .030 inch.
You will need a Champion RJ18YC/130-435 spark plug. Gap it to .30. You can buy them here: http://www.jsesc.com/
Autolite lists it as 2976 or SE2976DPT. I haven't installed the plug yet so I can verify.
Remove the two screws that attach the panel that the key is located on. The plug will be in the upper lh corner.
what is correct spark plug gap for aeriens 624E snowblower
Ah, replacing the spark plug on your Toro CCR 3650 GTS is a simple and important task to keep your snowblower running smoothly. You'll want to use a spark plug with the recommended gap size specified in your owner's manual, typically around 0.030 inches. Just gently adjust the gap if needed, and remember, it's all about taking care of your machine so it can take care of you.
The spark will depend upon the type of engine being used, either 2 cycle or 4 cycle. If it is a 4 cycle, chances are the engine was produced by either Tecumseh or Briggs.
how to replace plug wire on a toro mower
.30