(step one) line up your crank pulley on zero with the mark on the pulley.
(step two) the one dot on your diesel pump should be centre of the crank gears two dots.
s
(step three) line up the two dots on the cam gear with the arrow on the first cam cap behind the gear
The Mitsubishi Canter 4M51 engine does not have a timing belt or chain.
timing on 4m 51 engine
how to time a 4m51 canter engine
go to auto zone or your public library and they should be abe to help you
The timing marks for a Mitsubishi Canter 4M40 engine are typically located on the front of the engine, near the crankshaft pulley and the timing cover. The crankshaft pulley usually has a mark that aligns with a corresponding mark on the timing cover. Additionally, there are marks on the camshaft gear that should align with fixed points on the engine when the timing is set correctly. Always consult the vehicle's service manual for precise alignment instructions and specifications.
The timing setting for a 1988 Toyota Tercel is the "3E" hole lines at the top. This setting is for a Tercel EZ 1500 engine.
Hi,The Mitsubishi Canter does not have a timing chain or Belt.We are exporters of Auto Spare parts from India stocking all spares for :Mitsubishi CanterMazda T3500Toyota DynaSupreme MotorsTel : + 91 22 23877315Cell : +91 99672 03055Email : mail@suprememotors.in
For the Mitsubishi Canter 4M42 diesel engine, the timing marks for the fuel pump are typically aligned to ensure proper injection timing. The pump's timing mark should line up with the corresponding mark on the engine's timing case when the engine is at top dead center (TDC) on the compression stroke of the first cylinder. Always refer to the specific service manual for the exact alignment specifications and procedures, as variations may exist based on the model year. Proper alignment is crucial for optimal engine performance and efficiency.
Need more info. Year, engine, exc.
That requires an OBD2 engine scanner to set the timing. You can NO longer use a timing light.
To set the timing on a Toyota 22R engine find the distributor. The engine will have marks at which the distributor can be set. The OEM setting for a 22R engine is 5 degrees.
Depends on the year and model of the engine. Each are different.