32 psi
1994 Standard coupe model Tercels have 13" tires. About 155/80/R13.
155/80/r13
175/80R13
size wise they are nearly the same height as the 175 70 R13 tires specd for the 92-95 dx hatch I have so they wouldent throw the speedo off, but most places wont install them because they dont meet the load rating of 82 the car requires, I belive most 155 80 R13 tires only have a load rating of 79 which is the minimum load of the cx of the same year but the cx takes 165 70 R13 tires so 155 80 R13's would be to tall and throw the speedo off. I was contemplating doing this same thing for less rolling resistance for economy just bump the psi from 32psi to 35psi and the tires would theretically hold the same weight.
Should be P155/80/R13.That's what I run on mine.
195/75-13 would be the best replacement. 205/70-13 would be an acceptable replacement.
155/80
the tyre size are 155/80/13. for c15 goodluck
The recommended tire pressure for a skinny bike tire valve is typically between 80-130 psi (pounds per square inch).
P155/80-R13P means it is a passenger tire. 155 is the aspect ratio measured sidewall to sidewall in millimeters. 80 is the height of the tire listed in the percentage of it's width. R means it is a radial tire. 13 is the diameter of the wheel in inches.
The recommended tire pressure for a 23-inch bike tire is typically between 80-100 psi (pounds per square inch). It is important to check the specific recommendations on the tire sidewall for the most accurate pressure.
That will depend on the application and weight rating of the tire. A passenger car tire would be about 35 psi. A truck tire would be 80 psi.