Intake valve - .005 - .007"
Exhaust Valve - .009 - .011"
To measure the 1/4' piston drop down, I do the following:
After the spark plug has been removed, I insert a #2 wooden pencil eraser end first into the spark plug opening.
I rotate the piston to find TDC and mark the pencil using lip of the plug opening.
I then place another reference mark 1/4" away from the first mark, toward the point end.
With the pencil placed in the spark plug opening at TDC, I rotate the piston clockwise until the second, point end reference point matches the lip of the plug opening.
Yes
0.004 - 0.006"
The valve clearance setting for a Briggs and Stratton 16 HP engine typically ranges from 0.005 to 0.007 inches for both the intake and exhaust valves when the engine is at top dead center (TDC) on the compression stroke. It's crucial to consult the specific engine model's manual for precise specifications, as the settings may vary slightly depending on the model. Always ensure the engine is cool before making adjustments for accuracy.
cawl sistem
For a Briggs & Stratton 18.5 HP engine, the valve clearance setting is typically .004 inches for both the intake and exhaust valves when the engine is cold. It's important to consult the specific engine model's manual for precise specifications, as settings can vary slightly between different models. Always ensure the engine is properly maintained for optimal performance.
i think it is 4 thousand's of an inch, that's what i have my 14.5 set at and it runs great
The valve clearance on a Briggs and Stratton 21 HP OHV engine is typically set to 0.005 inches for both the intake and exhaust valves when the engine is cold. It's important to check the specific model's service manual for any variations or specific adjustments. Proper valve clearance ensures optimal engine performance and longevity.
No, the valve settings on a Briggs and Stratton 16 horsepower engine are not the same for both valves. Typically, the intake and exhaust valves have different specifications for clearance. It's important to refer to the engine's specific service manual for the correct valve adjustment settings to ensure optimal performance.
The valve clearance for a Briggs and Stratton 342cc engine is typically set at 0.003 to 0.005 inches (0.08 to 0.13 mm) for both the intake and exhaust valves. It's important to check the specific model's manual, as valve clearance specifications can vary slightly. Proper clearance ensures optimal engine performance and prevents valve damage. Always adjust the clearance when the engine is cold for accurate measurements.
http://www4.briggsandstratton.com/miscpdfs/RNT/Engine%20Specifications%20Chart_ms3992.pdf
The valve clearance for a 22 hp Briggs & Stratton engine typically ranges from 0.005 to 0.007 inches (0.127 to 0.178 mm) for both the intake and exhaust valves. It's important to refer to the specific engine model's manual for precise specifications, as there may be slight variations based on the engine type or configuration. Proper valve clearance ensures optimal engine performance and longevity.
Briggs doesn't publish engine compression specs, but 120 is good. 100 is okay. 80 is lousy.