That is for a 15 x 8 rim.
To determine your wheel size, you can check the numbers printed on the sidewall of your tire. Look for a series of numbers that typically start with "P" or "LT" followed by a combination of numbers that indicate the wheel size in inches. This information will help you identify the correct wheel size for your vehicle.
If the bolt pattern is the same along with the wheel size, probably. Though it's best to stick with the tire/wheel size recommended for the vehicle.
The 1992 Chevy P/U K-2500 came from the factory with R245-75R16 size tires, with an air pressure of 80 PSI cold. The load rating on this size tire is 4500lbs single(wheel). This size tire is a good all around tire, however you can count on a hard time finding a nice custom wheel for the 16" tire. If you plan on buying custom wheels, you will probably want to go to a 16.5" wheel, in which case you will NOT USE the R-245-75R16, you will need to go to the R-245-75R16.5 tire.
right tyre size for p reg corsa
P-Metric size is P215-70 R14.
P 265/70 R 15
P/185/60/r15
P 205/70 r15
P means passenger tire, 185 is the tread width, 70, or 75 is the aspect ratio of sidewall height to tread width. R is tire bead diameter. Same as wheel size. A 75 sidewall tire is taller than a 70 series.
The correct factory tire size for a 2011 Jeep Wrangler is P 255/75 R 17.
YES, The P stands for passenger tire / Lite Tire. For cars and small trucks. The other tire is a heaver tire for full size trucks, vans ect.
The ST means it is a trailer service only tire. P is passenger and LT would be Light truck.