means its time for a new trannsmission, and you probably put it in gear when moving .... i have an impala and if u take it out of gear when it is in motion say good bye to the tranny
Except for the very early models they are automatic, you don't need to do anything special to start the engine.
Spring Buck (Impala)
the only problem that you can repair yourself would be with the linkage. but if all other gears work except reverse then the problem is probably internal and should be inspected by a professional. it makes a big difference if the trans. is manual or automatic also.
There is nothing to reset except the radio presets and the clock.
ive got a 91 eagle talon also, the transmission is great. works perfect and all. BUT the reverse dosent work at all.. so in other words, all other gears work perfect. EXCEPT reverse. not sure of this problem.
Your car has an automatic transmission which includes a "neutral safety switch" to prevent the car being started while the shifter is in any position except "neutral" or "park". This switch is activated by the shift lever and prevents voltage to the starter solenoid when the car is in gear (drive or reverse). This is a safety features that prevents the car from lurching ahead or backward while starting.
What is the stock tire size for 1965 Chevrolet Impala? Answer: Regular Production (except Station Wagon and Convertible) was: 7.35 x 14 Convertible was: 7.75 x 14 Station Wagons were: 8.25 x 14 All 327 engine equipped vehicles (except Station Wagons) were: 7.75 x 14 All 409 engine equipped vehicles were: 8.25 x 14 Information found in 1965 Chevrolet Owners Guide, Specifications, page 45
Except for the Bicentennial reverse, the reverse of the Kennedy half dollar motif is the presidential coat of arms.
ANY GM SMALL BLOCK WILL FIT. I HAVE PUT A SMALL BLOCK CHEVY ENGINE IN A 280Z A 260Z AND A 300ZX.THEY WERE MATED TO AN AUTOMATIC EXCEPT FOR THE 260Z THAT RECEIVED A DOUG NASH 5 SPEED. THE SPEED AND POWER IS UNREAL.
how do you remove the automatic transmission from the 2004 wrx.... i have everything disconnected except for the gearing fork shifter.
Time for a new Tranny or a rebuilt. This is something that a Tranny shop needs to look at they have specialized equipment. First and reverse are usually the same gear except reverse direction. At least that has been my experience. It could just be shift solenoids are bad or even speed sensor. Have a good tranny shop check this out. Hope this helps
A very good question, except you could equally ask why the numbers are arranged in reverse order on a phone.