10w40
A 1991 Toyota MR2 with the turbo engine typically requires about 4.5 quarts of oil when equipped with a new oil filter. It's always a good practice to check the owner's manual or the oil filler cap for specific recommendations. Make sure to use the appropriate oil type for optimal performance.
I usually use 10W-40 full synthetic for summer season and 0W-40 full synthetic for winter season.
10w30
I use 10W-30
I use Syntec 5W40 in mine.
SAE 10w30 any premium brand.
10w-30 fully synthetic is best
a little less than three U.S quarts
Auto:Dextron Manual 80w90 Engine 10w30
Would have been built for R12, can be converted to R134a.
To fill the gear oil for a Toyota MR2, locate the transmission fill plug, which is typically found on the side of the transmission case. Use a funnel with a hose to pour the gear oil into the fill hole until it reaches the level of the fill plug. Ensure the car is on a level surface for accurate filling. Always refer to the owner's manual for the correct type of gear oil and specific procedures for your MR2 model.
The Toyota MR2 Turbo typically holds about 4.5 quarts (or approximately 4.3 liters) of engine oil when using an oil filter. It's important to check the owner's manual for the specific model year, as capacities can vary slightly. Always ensure to use the recommended oil type for optimal performance.