40w-70 though it is rare, and not advisable to use. In most auto stores you can find something in a 60 sae.
Not 100% certain, but I believe the 12.7 60 Series holds 11 gallons of oil.
For a Yamaha YZ 60 two-stroke, it's essential to use high-quality two-stroke engine oil specifically designed for air-cooled engines. Typically, a synthetic or semi-synthetic two-stroke oil is recommended for optimal performance and protection. Always follow the manufacturer's guidelines for the correct oil-to-fuel ratio, usually around 32:1 or 50:1, depending on the specific oil and conditions.
we use quality 15-40 oil fleet wide. Sample the oil at each change. And change oil. As on your truck manufacturer shedule. We are also in so calif. no extreme cold temps here.
Yes, Lucas Oil Stabilizer is thicker than 60 motor oil. It is designed to provide additional viscosity and enhance the performance of motor oils, especially in high-performance or older engines. The stabilizer has a higher viscosity rating, which helps reduce friction and wear, making it suitable for applications where extra protection is needed.
In a '89 Chevy Beretta the trans axle fluid is more of an oil and can be purshase at a local dealer. Its a 60 wt. synthetic oil. The fill tube is located between the motor and firewall,just under steering column at trans axle housing towards bottom of motor. It requires a funnle with a long flexable tube. Edit by Loosenut: If its a stick use Styncromesh 89/90 if its automatic use Dextron III
50:1 is the correct mixture for a 1992 Johnson 60 hp outboard.
For the 1961 Mercury Model 60 outboard motor, the recommended fuel-to-oil mixture ratio is 24:1. This means you should mix 5.3 ounces of two-stroke engine oil per gallon of gasoline. Always check the owner's manual for any specific instructions related to your motor.
I have a question for you before i can answer yours? is this an off highway motor or on highway motor please respond soon.
The 1984 model, 60 hp Johnson outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
The non oil injected model 60 hp Yamaha outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
The 1970 model, 60 hp Johnson outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.