A 1998 Cutlass horn blowing on its own can be caused by several issues, including a faulty horn relay, a short circuit in the wiring, or a stuck horn button. Moisture or corrosion in the electrical connections can also lead to unintended activation. Additionally, problems with the vehicle's alarm system could trigger the horn. Diagnosing the exact cause typically requires checking the electrical components and wiring associated with the horn.
Take out the fuse.
The horn for a 1998 old cutlass is under the hood on the passenger side. It is in the very front located on the frame or impact bar of the car. The easiest access to the horn is to remove the headlight assembly on the driver side.
its a horn that you blow in. no its not u dont blow in it u press a button on top and it makes a loud sound
Short in the wiring or a bad horn switch.
there is a short in the horn ring you need to take it completely apart
Inproper polarity on horn wires. or horn relay bad. Ensure voltage (12VDC) on horn wire when activating horn. If nothing... suspect relay.
You must defeat The Corn Boss by yourself and then you can blow the horn.
where is horn in 1992 cutlase supreme 3.1
The duration of Come Blow Your Horn - film - is 1.87 hours.
the horn relay switch is in the fuse panel or it should be on the horn wires itself
on the car
Come Blow Your Horn - film - was created on 1963-06-05.