SAE 30 weight full synthetic.
190cc equals how much horse power?
What is the gap on the spark plug on a Brigg's stratton lawn mower Model#31P777 Type 0348E1?
Brigg's and stratton 5.5 hp on the craftsman push mower your gap tool set the gap at .025-030 for briggs 5 hp
6 HP
RC12YC Champion
It is inside the float bowl hooked to the float witch is usually on the bottom of the carb. Hope this helps.
Where is the location of the idle screw on the Briggs and Stratton 6.0 engine mulcher mower?
Most have a 20 oz. nominal capacity, though usually it only requires 16 oz. during an oil change since not all will come out.
You can find the operator's manual for that engine at www.briggsandstratton.com. You will need to contact the manufacturer of the mower for the lawn mower owner's manual. Briggs and Stratton did not amke that mower, only the engine.
Briggs and Stratton does contract anyone to build mowers. The mower manufacturers contract Briggs and Stratton to build their engines (or whatever engine is on the unit). That is why you can have a Briggs and Stratton on most any type of mower. Same is true for Kohler, Tecumseh, etc. Not to say that the engine manufacturers do not build their own type of outdoor power tool but as the question states "snapper mower". Also keep in mind that if you have a snapper mower with a Briggs and Stratton engine and you need warranty work on the engine you need to go to an Authorized Briggs repair facility where as if you have a mower warranty then you need to go to an authorized repair facility for the mower manufacturer.
a manul to show me the way to do it
0.030 is the gap for briggs and stratton 4.5 hp mower