0
For a 2003 Suzuki Eiger 400, it's recommended to use 10W-40 motorcycle oil that meets the JASO MA or MA2 specifications. Synthetic or semi-synthetic oils are often preferred for better performance and protection. Always check the owner's manual for specific recommendations and maintenance guidelines.
What else can I help you with?
What is the spark plug gap on a 2003 Suzuki Eiger 400?
.031
What kind of oil and oil filter for 2003 Suzuki Eiger 400?
For a 2003 Suzuki Eiger 400, it's recommended to use 10W-40 engine oil, preferably a high-quality motorcycle or ATV oil that meets API service ratings. As for the oil filter, you should use a Suzuki OEM filter or an equivalent aftermarket filter that fits the specifications for that model, typically part number 16510-07G00. Always check your owner's manual for specific recommendations and guidelines.
What kind of motor oil is required in a suzuki eiger 400?
10-w40 non synthetic
How much oil does a suzuki eiger 400 take for an oil change?
The Suzuki Eiger 400 typically requires about 2.5 quarts (or approximately 2.4 liters) of oil for an oil change, including the oil filter. Always refer to the owner's manual for the most accurate specifications and recommendations. Make sure to use the correct type of oil for optimal performance.
How do you set valves for a 400 quadrunner suzuki eiger?
how do you set the valves & what are the adjustments for the valves on a 2007 suzuki eiger 400
How many miles a suzuki eiger 400 ATV can last?
Alot if u takecare of it. Oil changes....etc.
Where is the VIN located on your suzuki eiger 400?
on the frame
What is the horsepower of the 2007 Suzuki eiger 400?
22hp
Value of 2004 suzuki eiger 400?
Um... not sure
2002 eiger 400 with 650 miles on it it has always had a bad roar in the rear end is there an adjustment you and do to correct this?
2002 eiger 400 with 650 miles on it it has always had a bad roar in the rear end is there an adjustment you can do to correct this.
Location of oil drain plug on four wheeler suzuki eiger 400?
Underneath and just about in the middle of the skid plate. There should be a hole in the skid plate so you can get at it. Hope that helps
What is piston size on a 2006 suzuki eiger 400?
82MM is standard bore and 71.2MM is the Stroke
