0
What else can I help you with?
Why temperature gauge needle doesn't go back to zero when turn off car?
If the temperature gauge needle doesn't go back to zero when the car is shut off, it is possible that the needle is sticking. A little WD-40 or electronic spray on the gauge might fix the problem. There could also be a problem with the MAP Sensor or a Radiator Pressure sensor in the engine.
Gas gauge not working?
my gas gauge is not working what could be the problem
How to adjust the zero error in pressure gauge?
step-1:remove the pressure gauge from the equipment when machine is in off condition. step-2:remove the cap and glass of the gauge. step-3: remove the needle of the gauge with a needle puller( a special tool ) step-4: place the same needle indicating zero. step-5: fix the glass and cap as usual. step-5: check(calibrate) the gauge on a dead weight tester with a master degital pressure gauge.
1987 Chevy Celebrity fuel gauge stuck?
If the fuel gauge is stuck, the needle never moves, then the gauge has a problem and needs to be replaced.
Why is your oil pressure gauge going haywire in your 2003 silverado?
AnswerWhat do you mean by haywire? Without more information, all I can tell you to do right now is to replace the filter you are using with an AC/Delco filter. The oil pressure sending unit may be defective if you are getting erratic readings. I mean that the water temp gauge needle goes way past the point to where it bottoms out and so does the battery volt gauge needle and the oil pressure gauge needle and the tach needle works when it wants to.
Is a 30 gauge needle smaller then a 31 gauge?
Yes, a 30 gauge needle is larger than a 31 gauge needle. In the gauge system, a higher number indicates a smaller diameter, so a 31 gauge needle is thinner than a 30 gauge needle. Therefore, the 31 gauge needle would be the smaller of the two.
Is a 23 or 25 gauge needle smaller?
A 25-gauge needle is smaller in diameter than a 23-gauge needle. The larger the gauge number, the thinner the needle, so a 25-gauge needle has a smaller lumen compared to a 23-gauge needle. This means that for tasks requiring finer needles, such as pediatric or cosmetic procedures, a 25-gauge needle would be preferred.
What is the bourbon gauge and explain principal of working?
A bourdon gauge is a type of aneroid gauge. It is used to measure pressure.
Why is a 21 gauge needle recommended for venipuncture?
The 21 gauge is a smaller needle.
Is a 22 gauge smaller than a 23 gauge needle?
Gauge is the term that indicates the diameter of the needle. Most commonly the needles that are used for medical purposed range from 7 Gauge to 33 Gauge, according to the Stubs scale. 7 Gauge needle will have the largest diameter while as the number increase, the diameter decreases. Therefore the 33 Gauge needle has the smallest diameter. So a 26 Gauge needle will have a smaller diameter than that of the 18 Gauge needle.
Is the gauge of the needle the bore size?
Yes, the larger the gauge the smaller the needle size.
Oil pressure gauge not working?
replace oil sensor unit
