Axle
Axle
A rod to which a wheel or wheels is attached is an axle.
Axel
The main bearings are what supports the crankshaft. The rod bearings go on the rod that the pistions are hooked to. Rod bearings are smaller then the main bearings on all engines.
It transmits the steering input from the steering box to the wheels. This turns the wheels.
pretty sure you mean 'Luge'
Tie Rod.... I believe he is referring to the axle, the tie rod is connected to the axle.
Connective to the earth: An Imaginary line that the earth rotates on. To wheels: A Stick/tube/metal rod that wheels rotate on.
The axel rod keeps the wheels in place
To replace the inner tie rod ends on a 2004 Chevy Aveo, first, safely lift and support the vehicle, then remove the front wheels. Disconnect the outer tie rod ends from the steering knuckle and remove the boot to access the inner tie rod. Use a tie rod end tool to unscrew the inner tie rod from the steering rack, then install the new inner tie rod by reversing the process. Finally, reattach the outer tie rod and wheels, and perform a wheel alignment to ensure proper handling.
To replace the inner tie rod on a Honda Pilot, first, safely lift and support the vehicle, then remove the front wheels. Disconnect the outer tie rod end from the steering knuckle and use a tie rod tool to unscrew the inner tie rod from the steering rack. Install the new inner tie rod by threading it into the steering rack, ensuring it’s tightened to the manufacturer’s specifications. Finally, reattach the outer tie rod and wheels, and check the alignment as it may be affected by the replacement.
Unbalanced wheels or a bent track rod
remove the door panel and make sure that the rod that goes to the latch is hooked up