Check your engine. Check your fluid levels and add if needed.
I own a 97 pickup with a ka24e and the vacuum diagram is right on the hood. But a local Nissan dealership should be able to print a copy of one from their service manual for you.
Well It depends. The engine might be a little different, the the instuments should be the same. Also, a 1990 pickup and a 1992 Pathfinder are pretty much the same in instuments.
To reset the check engine light on a 1991 Nissan pickup, you can disconnect the negative terminal of the battery for about 10-15 minutes, which will clear the engine codes. After reconnecting, the check engine light should go off. Alternatively, you can also use an OBD-I scanner to clear the codes, if you have access to one. Make sure to address any underlying issues that triggered the light before resetting.
It should be 3.1-3.8 psi.
what engine oil should should be used in the 1.5 diesel nissan qashqai? 2010 model
10.5 qts.
Yep... It should have one.
The clutch switch on a 1995 Nissan pickup is typically located near the clutch pedal assembly, mounted on the bracket that holds the pedal. It is activated when the clutch pedal is pressed, allowing for functions like starting the engine. If you have trouble finding it, follow the clutch pedal up to where it connects to the master cylinder, and you should see the switch.
the computer should be under the dash to the right of the gas pedal
Yes, those are the same engines, should be no problem
You can use any SAE certified engine oil in your Nissan. The engine oil should be a 10W-30 weight engine oil.
It should be down below where the slave cylinder connects to the tranny