0
What else can I help you with?
What is the ideal oil pressure for a sbc 350?
Oil pressure should be 40 to 50 psi
To locate leaks which of the following should be built up in all part of the system the heat the pressure or the oil pressure?
the pressure
Where is the oil pressure switch located on a 2004 Chrysler pacifica?
The oil pressure switch is located on the oil filter adapter. Find the oil filter and you should see the oil pressure switch.
What is the oil pressure on a 88 ford bronco?
Oil pressure varies but should normally be around 40psi
Low oil pressure reading when idling for a 1986 fiero?
A low oil pressure reading when idling for a 1986 Fiero is normal. As long as the oil pressure goes back to normal when the car is being driven, there should be no problem. If it is not, then the oil pressure sensor or the oil sending unit should be looked at.
Where is the Oil Pressure Switch on a 92 Ford Probe?
The oil pressure switch should be above the oil filter on the back of the engine on a 2.2L.
What is the correct oil pressure for a 1987 corvette?
The 1987 Chevrolet Corvette oil pressure should be between 45 PSI and 40 PSI. The idling oil pressure will be slightly less.
Should I Pressure wash oil off engine?
no
What should oil pressure be on 2005 elantra?
32lbs
What should your Oil pressure be on your 5.7 93 suburban?
if i remember correctly when you first crank the engine the oil pressure should be around 60psi. after it warms up about 40psi.
Will faulty oil pressure sensor harm engine?
No, a defective oil pressure sensor will not harm the engine as long as the oil pressure is what it should be. However, how do you know what the pressure is if the sensor is bad. Replace the sensor so that you can receive a warning if the oil pressure drops below what is optimum.
Where is the oil pressure sender on a 04' cavalier ls?
The oil pressure sensor screws into the block. It is mounted close to the oil filter and should be easy to reach.
