You use a scan tool to check for codes. Then you know what to test.
Check for and repair any exhaust or fuel leaks.
How do you reset engine light on jeep liberty diesel
It shuoldn't but I would check with the manufacture of the diesel engine you have..
A flashing check engine light normally means you have a misfire.
Depends on what engine is in this car. Use the 5W-40W grade fully synthetic engine oil. For gasoline engine check that the oil is A3 spec. For diesel engine, it should be B3 spec.
If engine starts, Fevs, then dies. Check for diesel fuel in gas tank.
yes, because it is a diesel engine and has big pistons and slow revs but if it is very bad you should check your engine mountings
It would depend on the climate you live in. Check the drivers manual for the proper oil for your climate.
being a super duty i assume this is a diesel engine. diesel trucks have 2 batteries. did you check both batteries. then check all fuses if it is a diesel engine there will be 2 batteries .did you check both batteries
To determine if a truck is diesel-powered, you can check the fuel cap or fuel door for labels indicating diesel fuel, look for a diesel exhaust fluid (DEF) tank, or listen for a louder engine noise and a distinctive diesel engine sound when the truck is running.
Check your manual. It will call for a synthetic diesel oil in either 5w30 or 5w40.Check your manual. It will call for a synthetic diesel oil in either 5w30 or 5w40.
A scan tool is required to clear the check engine light. If the failure is not repaired, the light will return.