0
When approaching a car with high beams on, you should reduce your own glare by looking slightly to the right side of the road. This will help you maintain visibility while avoiding direct eye contact with the oncoming high beams. You can also adjust your speed to create more distance between you and the other vehicle, or flash your own high beams quickly to signal the other driver to dim theirs. If the glare persists, consider pulling over safely until the other vehicle passes.
What else can I help you with?
How far should you turn off your high beams from an approaching car?
1,000 feet.
If you are using your high beams at night and another car approaches what should you do?
You need to turn your high beams down and ,after the car passes, you may turn them back to high beams
You are driving at night Are you required to lower your high-beams when an approaching car comes within 500 feet?
Yes!
Drivers must dim their high beams within how many feet when following behind another vehicle?
You must dim your high-beams if you're within 500 feet of an approaching car and dim your high-beams within 300 feet of the vehicle you follow.
Why do turn signal only work when high beams are on?
Take your car in to have it checked. Turn signals should work without high beams.
What is the distance to use your low beams when a car is approaching?
As soon as you see a car directly in line towards you, you should go to low beam.
What should you do when an oncoming car is using its high beam?
Flash your high beams quickly to remind the other driver to drop the high beams and if that doesn't work try to focus on the right side of the road.
When approach a car using their high beams you should?
Look to the side of the road at the white line (not the center).
Why was I stopped for using my high beams at night?
High beams should only be used in extreme darkness and only when there is no other vehicle in your opposing lane. The reason behind this is because high beams can be blinding in the opposing lane and can and have lead to very serious accidents.Answer If your high beams were left of as on-coming traffic was approaching it would be blinding to the other driver. If you have your high beams on while in back of another car, it could also be blinding to the driver your following through side and rear view mirrors. Either way it is dangerous. If your high beams were left on constantly through - lets say a city - where lighting is good, the police officer may have determined that it was suspicious, and was checking to see if you were on alcohol or drugs.
Where is the switch location for changing from high beams to low beams on a 1989 Pontiac Grand Prix?
It should either be on the dash board where you can turn your interior lights on or you should pull back on the directional to switch. Cars run with the low beams on and the high beams are switched to in the dark when you feel you need extra light. I feel bad for the people that have been coming in the other direction from this car if its high beams have been on constantly.
What should a driver do at night if an oncoming car has its high beams shining into your eyes?
Look down to the right hand side and use the edge of the road as a guide. If you are MORE than 500 feet away from the car with it's high beams on, it IS legal to briefly "flash" your high beams on AND right back off. However, if you are LESS than 500 feet from the oncoming car, you could get a ticket for briefly turning your high beams on/off as a reminder-signal to the other driver to "turn off your high beams, buddy!"
When you approached a car using their high -beam lights you should------?
you should look at the center of the road at the white line You can quickly flash your high beams to remind them that their highs are on.
