5.5 mm Allen Key
The Holden Barina vehicle is primarily in Australia although there is always the option to import a vehicle if need be. The Barina has been awarded the highest possible safety rating of 5 stars.
T45
Hi, I'm not sure how you would fix that, but I'm sure someone at www.holdenbarina.net would be able to help you. It's a forum dedicated to Holden Barina's and the members are really nice and helpful.
You need aTorx 45 size
Could be bad petrol or maybe the fuel injectors need cleaning.
I changed the brakes on a 1997 Holden Barina SB today (21/5/11). You will need a 10mm Allen key to take off the brake housing. Do yourself a favour and buy a set of Allen key type attachments for a ratchet. Makes it much easier.
You will first need to drain out the old oil. Once it is all gone, you can replace it with some fresh oil.
The flasher unit on a 2012 Holden Barina is typically located under the dashboard, near the steering column. It can often be found in the fuse box area, which is usually on the driver's side. To access it, you may need to remove the cover of the fuse box. If you're unsure, consulting the owner's manual can provide specific guidance.
The flasher relay unit is under a black case on the passenger side firewall. To get into it you need to remove the plastic wiper surround to be able to access the screws.
The fuse box for a 2004 Holden Barina is typically located under the dashboard on the driver's side, near the steering column. There may also be a secondary fuse box located in the engine compartment. To access the fuses, you will need to remove the cover, which usually has a diagram indicating the function of each fuse. Always ensure the ignition is off before checking or replacing any fuses.
need a diagram off drive belt on 1998 barina
Yes you need a Torx bit to remove the sump plug. Also be careful when you remove the sump plug, there is a O ring on the plug that may fall off. Oh by the way, alot of Astra bolts use Torx (Many manufacturers recomend that you replace the sump plug & o ring)