It will depend on if you need high beam or low beam. See sources and related links for lamp part numbers and options.
how can i replace a brakelight bulb on a 2002 nissan frontier?
To change the headlights on a 2006 Nissan Titan, first, open the hood and locate the headlight assembly. Remove the retaining clips or screws holding the assembly in place and carefully pull it out. Disconnect the electrical connector from the back of the headlight bulb, then twist the bulb socket counterclockwise to remove the old bulb. Insert the new bulb, reconnect the electrical connector, and reassemble the headlight assembly.
Lift up the hood and look at the back of the headlight you need to replace. Disconnect the electrical connection and then turn the bulb counterclockwise. Then pull it out and replace it with a new bulb. Don't forget to reconnect the electrical connection.
To change the high beam headlight bulb on a 2006 Nissan Altima, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector from the bulb by pulling it straight off. Remove the rubber cover if present, then turn the bulb socket counterclockwise to release the old bulb. Replace it with a new bulb, secure it by turning it clockwise, reattach the rubber cover, and connect the electrical connector back.
what type of headlight bulb in a 2000 nissan wingroad
take out the bulb
newtest3
H13 for the Headlight and H11 for foglight.
To replace the headlight bulb on a 1996 Nissan Almera you should first unplug the electrical connector to the bulb. Turn the bulb counter clockwise to remove it. Place the new bulb in and turn it clockwise. Reconnect the electrical connector.
To replace the headlight bulb in a Nissan Pulsar a person must first find the headlight assembly which is slightly behind the lamp housing. Once the headlight assembly is accessed, all an individual would have to do is loosen the bulb a half turn and the whole thing comes out, then replace with the new bulb using the reverse method.
go to back of headlight assembly and twist it out.
Take a hammer. smash the headlight assy. lens. Remove old bulb, put in new.