well it might give you a clue, i would suggest a 5 ampere fuse for that 5 amp plug
In the UK, you cannot put a 5 amp fuse in a 3 amp plug. The general rule of thumb is that you should use like for like.
If you mean the fuse in the plug that connects to the mains... no more than a 5 amp fuse.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
1 amp
no you can't
If the computer is moden then use 5 amp and if the computer is older and smaller then use a 3 amp
4 amp, 250 volt (ASC) is what the fuse says on my blender
No.
The main difference between a 5 amp fuse and a 6 amp fuse lies in their respective current-carrying capacities. A 5 amp fuse is designed to safely carry up to 5 amperes of current before breaking the circuit to protect the electrical components from damage due to overload. On the other hand, a 6 amp fuse can handle up to 6 amperes of current before breaking the circuit. Therefore, the 6 amp fuse has a slightly higher current rating and can tolerate a slightly higher load compared to the 5 amp fuse.
It's the standard Type 'G' 3-pin plug used in the UK for electrical equipment and appliances. It should always contain a cartridge fuse of the right size to match the current or "amperage" drawn by the equipment/appliance it is supplying with power. Standard fuses to fit the plug are available in 13 amp, 5 amp, 3 amp and 1 amp sizes. For more information see the Related Link and the answer to the Related Question shown below.
If you are asking can I put a 10 amp fuse in instead of a 5 amp ,the answer is yes. However do not leave it in there. It is ok in an emergency, if the 10 blows right away , then you will have to find your problem.. Always try to keep the proper size fuses installed. If you are asking can I put a 10 amp fuse in instead of a 5 amp ,the answer is yes. However do not leave it in there. It is ok in an emergency, if the 10 blows right away , then you will have to find your problem.. Always try to keep the proper size fuses installed. If you are asking can I put a 10 amp fuse in instead of a 5 amp ,the answer is yes. However do not leave it in there. It is ok in an emergency, if the 10 blows right away , then you will have to find your problem.. Always try to keep the proper size fuses installed.
This is a unclear question, and not easy to answer. In your fuse panal, their will be a range of fuses, from 5 amp, up to 30 amp. On your fuse panal cover, should be a digram of your fuse panal, and which amp fuse goes into which slot.