0
What else can I help you with?
What is the weight of 2001 mercury 125 hp outboard?
The dry weight for a 2001 model, 125 hp Mercury outboard is 347 lbs., the saltwater model is 367 lbs.
What is fuel mixture for 2001 25hp mercury outboard?
50:1
What is the oil ratio for 2.5 hp mercury outboard motor 2001 model?
For a 2001 Mercury 2.5 hp outboard motor, the recommended oil-to-fuel mixture ratio is typically 50:1. This means you should mix 2.6 ounces of two-stroke engine oil per gallon of gasoline. Always refer to your owner's manual for the most accurate and specific recommendations for your model.
What is the fuel mix for 2001 Johnson outboard motor?
50:1
What is the fuel to oil ratio for a 2001 200 hp mercury outboard?
1:100....
8hp Mercury boat motor and need spark plugs what size are they?
An 8 hp Mercury outboard uses the following plugs, depending on the model. 1986-2000, 2 stroke, NGK BP8H-N-10 (0.40 gap) 2001-2006, 2 stroke, NGK BPZ8H-N-10 (0.40 gap) 2006, 4 stroke, NGK DCPR6E (.035 gap)
Where is the start button on a 2001 15 horsepower Johnson outboard motor?
At the end of the rope stupid
Will a sunroof motor from a 2002 Mercury Cougar work with a 2001 Mercury Cougar?
yes
Spark plug location on a 2001 2.5 liter mercury cougar?
The Spark plug location on the 2001 2.5 liter dohc is under the valve cover.
How do you change plug in 2001 Mercury Grand Marquis?
Remove the spark plug wire from your 2001 Mercury Grand Marquis. Remove the spark plug with a 5/8 deep well socket, white turning it to the left. Reverse the process to put in the new spark plug.
What is the proper gas to oil ratio mix for a 2001 mercury 25 horsepower outboard motor?
50 to 1 (50 parts gasoline to 1 part oil). Or in everyday language 16 oz to 6 gallons of gasoline. There should be a label on your motor that gives this information. Of course if your Mercury is oil injected, you do not pre mix the oil in the gasoline.
How do replace a window motor on a 2001 Mercury Villager?
Begin by removing the inside door panel of your 2001 Mercury Villager. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
