0
What suppliesthe ae2100d3 fadec with power until engine rpm is sufficient for the alternator stator to take control?
The FADEC already has power prior to engine start. In fact it controls the entire start sequence. It receives power under normal starting conditions via an ECBU ; the acft will have power from either an external source, the APU, or an operating engine. The alternator stator provides power to the FADEC once the engine reaches 10% NG. This way the engine is entirely self sustaining once started and during the majority of start sequence. Should the alternator stators fail, power is then given from the ECBU again (28v DC power source).
What else can I help you with?
What do the alternator and vsc warning lights on a 2006 highlander mean?
The alternator warning light on a 2006 Highlander indicates a problem with the vehicle's charging system, suggesting that the alternator may not be generating sufficient power or that there is an issue with the battery or wiring. The VSC (Vehicle Stability Control) warning light signals a potential issue with the vehicle's stability control system, which helps manage traction and stability in various driving conditions. If either light comes on, it's advisable to have the vehicle checked by a professional to diagnose and address the underlying issues.
Does the alternator control all charging on a 1999 chrysler sebring convertible?
The alternator does the charging and it is controlled by the engine computer.The alternator does the charging and it is controlled by the engine computer.
How come 1995 Oldsmobile cutlass alternator not charging battery new battery and alternator?
You have an open connection from the large alternator output post to the starter main battery post or fuses blown or circuits open feeding the alternator control wiring.
What is the function of the regulator in an alternator?
To control the alternator's output voltage under varying loads.In simple terms it regulates the voltage being sent to the battery.
Does subaru wrx alternator have voltage regulator or does ECU control?
it has a inbuilt regulator
I have a 1988 Chevy Cavalier. I replaced the Alternator and Battery and also changed a linkable fuse between the alternator and battery. The test still reads no output to alternator. Any ideas?
?ignition control module/pickup
You recently replaced the battery and alternator on your 96 rodeo now the battery light is on on the dash faintly why?
The voltage regulator (which is inside the alternator) on 97 rodeo's are controlled via the PCM/ECM (Power Control Module/Engine Control Module). A remanufactured alternator for the 97 Rodeo as well as the 97 Passport (Honda), usually will fhow failure while tested in car. On the bench test, however, the alternator tests normal. Aside of the normal problems to be ruled out, ie; alternator belt tension, check for loose connections within and around the alternator, try an original factory alternator. Is this problem affecting your blower motor?
What method is used to control the voltage of an aircraft alternator?
Aircraft alternators have an electronic voltage regulator.
How much should it to replace the alternator for volvo2011?
2011 and not still under warranty? The Alternator witch has a ACM (alternator control module) built in will run in the retail area of 475 to 600 dollars. Labor time is usually 1.5 to 2 hours
Have replaced alternator twice on 1999 zx2is this common?
Depending on how long the interval was between alternator changes. Less than a year and I would look for warranty on the alternator. Now there are factors beyond the alternator manufacturers control. A battery that is on it's last legs will take out an alternator really fast. A stereo system with a large Amp(s) will also shorten the life of an alternator drastically. These situations will not be a warranty issue.
What does the computer control on your 1989 jeep wrangler yj 2.5 liter?
It controls all aspects of the engine, alternator, air conditioning, cruise control.
Why alternators are connected in parallel?
If alternators are connected in series then if one alternator damaged then,whole alternator that all connected to it will be damage.Interruption will occur.so by connecting parallaly if one alternator will damage,then others are safe and they will supply power to load. Anathor thing is that we can control our power.
