if its dripping oil you may have a gasket problem and/or White smoke means piston rings on the way out.
If your DG engine oil consuming more means : - You are running DG without loador lower than 30% of the DG Capacity.
10w-40 motorcycle or ATV engine oil
for my three wheeler i just use regular 10-w40 engine oil it works great is cheap and easy to get
dump all the oil and gas out of it change the sparkplug clean the airfilter and oilfilter and don't sink it NO MORE.
The current API rating for diesel engine oil is CJ.
38 to 46, typically. Depends on the engine.
Yes. Adding more oil than recommended can result in oil being forced where it doesn't belong in any 4 stroke engine. This can result in excessive oil burning (smoke), fouling spark plugs, and build up on piston rings which can reduce engine life.
To change the oil in a four-wheeler, first, ensure the vehicle is on a level surface and turn off the engine. Start by draining the old oil by removing the oil drain plug and letting it flow into a pan. Replace the oil filter using an oil filter wrench, then reinstall the drain plug. Finally, refill the engine with the appropriate type and amount of new oil through the oil filler cap.
I have the same exact wheeler, and mine holds about 2.5 to 3 quarts of oil.
Depending on the manufacturer, the average 110cc engine requires approximately 1 US quart of oil.
Depends on the make, model, engine size, and year which you fail to list.
The engine oil capacity of the Honda TRX300FW FourTrax 300 is 3 quarts. For this four wheeler, 10W-40 4 stroke motorcycle oil is recommended.